Dahua JRC-27F

User's Manual
300
Figure 5-209 Global hotspare
Step 3 You can select
Local Hotspare
or
Global Hotspare
.
●
Local Hotspare
: Select the target disk, and the current disk will serve as the hot spare
disk for the selected target disk.
●
Global Hotspare
: The current disk will serve as the hot spare disk of the entire RAID.
Step 4 Click
OK
.
Click to delete a hot spare disk.
5.12.4 Disk Group
By default, the installed HDD and created RAID are in Disk Group 1. You can set HDD group, and HDD
group setup for main stream, sub stream and snapshot operation.
Step 1 Select
Main Menu
>
STORAGE
>
Disk Group
.