User's Manual
209
Figure 5-124 Crowd gathering
2) Click to draw the minimum size or maximum size to filter the target.
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
3) Set parameters.
Table 5-33 Crowd gathering parameters
Parameter Description
Preset Select a preset you want to use IVS.
Name Customize the rule name.
Duration Set how long the object stays until the alarm is triggered.
Sensitivity
You can set alarm sensitivity. The higher the value, the easier to detect
crowd gathering but meanwhile the higher false alarm rate.
4) Click
OK
.
Step 6 Configure alarm schedule and linkage.
To Next Page
Loading...
Need help?
General
