User's Manual
159
Figure 5-68 Video schedule
Step 2 Configure the parameters.
Table 5-22 Video schedule parameters
Parameter Description
Channel Select a channel to record a video.
Pre-record
Enter the amount of time that you want the pre-recording to last. A
recording will be made prior to the event.
Redundancy
If there are several HDDs installed to the Device, you can set one of
the HDDs as the redundant HDD to save the recorded files into
different HDDs. If one of the HDDs becomes damaged, you can find
the backup on the other HDD.
●
Select
Main Menu
>
STORAGE
>
Disk Manager
, and then set a
HDD as redundant HDD.
●
Select
Main Menu
>
STORAGE
>
Schedule
>
Record
, and then
select the
Redundancy
checkbox.
◇
If the selected channel is not recording, the redundancy
function will take effect the next time that you record,
whether or not you select the checkbox.
◇
If the selected channel is recording, the current recorded files
will be packed, and then start recording according to the new
schedule.
●
This function is for some models only.
●
The redundant HDD only backs up the recorded videos but not
snapshots.
To Next Page
Loading...
Need help?
General
