User's Manual
212
Figure 5-127 Missing object
2) Click to draw the minimum size or maximum size to filter the target.
The system triggers an alarm only when the size of detected target is between the
maximum size and the minimum size.
3) Configure parameters.
Table 5-34 Parameters of missing object detection
Parameter Description
Preset Set the preset point for IVS detection according to the actual needs.
Name Customize the rule name.
Duration Set how long the object stays until the alarm is triggered.
4) Click
OK
.
Step 6 Configure alarm schedule and linkage.
To Next Page
Loading...
Need help?
General
