User's Manual
280
●
The IPC has wireless repeater module.
This function is available on select models.
Procedure
Step 1 Power on the NVR and wireless repeater IPC, and connect all IPCs to the NVR through Wi-Fi.
Step 2 Select
Main Menu
>
NETWORK
>
REPEATER
.
●
Green connection line represents the successful connection between channel and
wireless IPC.
●
Auto cascade: After selecting auto cascade, the IPC can cascade to NVR automatically.
Figure 5-191 Repeater
Step 3 Select
Manual Cascade
.
You can use manual cascade when there are at least two IPCs on the network.
To Next Page
Loading...
