2 Spyder3 SG-34 GigE Vision Color Manual
03-032-20124-00 Teledyne DALSA
© 2012 Teledyne DALSA Inc. All information provided in this manual is believed to be accurate and reliable. No responsibility is
assumed by Teledyne DALSA for its use. Teledyne DALSA reserves the right to make changes to this information without notice.
Reproduction of this manual in whole or in part, by any means, is prohibited without prior permission having been obtained fr om
Teledyne DALSA.
About Teledyne Technologies and Teledyne DALSA, Inc.
Teledyne Technologies is a leading provider of sophisticated electronic subsystems, instrumentation and communication product s,
engineered systems, aerospace engines, and energy and power generation systems. Teledyne Technologies’ operations are prim arily
located in the United States, the United Kingdom and Mexico. For more inform ation, visit Teled yne Technologies’ w ebsite at
www.teledyne.com.
Teledyne DALSA, a Teledyne Technologies company, is an international leader in high performance digital imaging and
semiconductors with approximately 1,000 employees worldwide, headquartered in Waterloo, Ontario, Canada. Established in 1980,
the company designs, develops, manufactures and markets digital imaging products and solution s, in addition to providing MEMS
prod u cts and services. For more information, visit Teledyne DALSA’s w ebsite at www.teledyned alsa.com.
Support
For further information not inclu d ed in this manual, or for inform ation on Teled yne DALSA’s extensive line of im age sensing
products, please contact:
Asia Pacific
Ikebukuro East 13F
3-4-3 Higashi-Ikebukuro
Toshima-ku, Tokyo 170-0013
Japan
Tel: 81 3 5960 6353
Fax: 81 3 5960 6354 (fax)
www.teledynedalsa.com
sales.asia@teledynedalsa.com
support@teledynedalsa.com
Industry Standards
Spyder GEV cameras are 100% compliant with the GigE Vision 1.0 specification. This specification defines the communication
interface protocol used by GigE Vision devices. For more information on these requirements refer to the following site:
http:/ / www.machinevisiononline.org/ public/ articles/ details.cfm?id=2761
Spyd er GEV cam eras im p lem ent a superset of the GenICam™ specification which defines d evice capabilities. This description tak es
the form of an XML device description file respecting the syntax defined by the GenApi module of the GenICam specification. For
more information on these requirements refer to the following site: www.genicam.org.
To Next Page
Loading...
Need help?
General
