Dalsa Spyder3 SG-34 Series User Manual

64 Spyder3 SG-34 GigE Vision Color Manual
03-032-20124-00 Teledyne DALSA
Rescale the line trigger signal
The rotary encoder has its own built-in rescaler. Setting Rotary Encoder Multiply Factor to 0 produces an
output frequency that is 4 times the rotary encoder output. To set the output to be the same as rotary encoder
output, set the Rotary Encoder Multiply Factor to 1 and Rotary Encoder Drop Factor to 4.
Figure 39: Rotary Encoder Multiply Factor
The forward and reverse direction is set by changing ―Rotary Encoder Direction Phase‖.
Check the direction shown in the Direction Control Group to confirm the direction;
Figure 40: Rotary Encoder Direction Phase
In some situations, it is desirable to only respond to one direction, either forward or reverse, yEnable the
Encoder Backlash Control function and the Scan Direction to desired direction.
All manuals and user guides at all-guides.com

Dalsa Spyder3 SG-34 Series Specifications

General

Brand	Dalsa
Model	Spyder3 SG-34 Series
Category	Digital Camera
Language	English