Danfoss VLT AQUA Drive FC 202 Programming Guide

23-82 Investment
Range: Function:
0* [0 -
999999999 ]
Set the value of the investment spent on
upgrading the plant with speed control, in
same currency as used in
parameter 23-81 Energy Cost.
23-83 Energy Savings
Range: Function:
0 kWh* [0 - 0
kWh]
This parameter allows a readout of the
accumulated dierence between the reference
power and the actual output power.
If motor size is set in hp
(parameter 1-21 Motor Power [HP]), the
equivalent kW value is used for the energy
savings.
23-84 Cost Savings
Range: Function:
0* [0 - 2147483647 ] This parameter allows a readout of the
calculation based on the above equation
(in local currency).
23-85 CO2 Conversion Factor
Range: Function:
500
g*
[0 -
1000 g]
Enter the CO2 emission in grams per 1 kWh of
electrical energy produced. Typical life-cycle
greenhouse-gas emission values for dierent
power sources are:
•
Renewable: 25 g.
•
Nuclear: 70 g.
•
Natural gas: 350 g.
•
Oil: 800 g.
•
Coal: 1000 g.
For more precise emission values in your
region, contact your regional environment
agency.
23-86 CO2 Reduction
Range: Function:
0 kg* [0 - 0
kg]
Shows the CO2 depletion in kg based on the
CO2 conversion factor (parameter 23-85 CO2
Conversion Factor) and saved energy
(parameter 23-83 Energy Savings).
Parameter Description Programming Guide
MG20OB02 Danfoss A/S © 05/2018 All rights reserved. 201
3 3

Danfoss VLT AQUA Drive FC 202 Specifications

General

Brand	Danfoss
Model	VLT AQUA Drive FC 202
Category	DC Drives
Language	English