Manual Datafox Evo 4.3 Page 36 Date: 27.12.2017 V 04.03.09.XX
5.3.1. Switch lighting depending on the result
With this function you control e.g. the signaling of a valid / invalid transponder.
The distinction between valid or invalid is determined by a selection from a "personnel list".
If the number of the ID card is not found in the list, the list box is ended with an "ESC". That the col-
or of the lighting can be controlled depending on the result.
Find by the list selection no en-
try, then switch the backligt to:
„Result: ESC“
To Next Page
Loading...
