Datalogic Gryphon I GFS4400 - 2 D Structured Append; 2 D Normal;Inverse Symbol Control

2D Symbologies Enter/Exit Programming Mode
Product Reference Guide 187
2D Structured Append
Enables/disables ability of reader to append multiple 2D Codes labels in a structured format.
The structured append property is globally applied to the following symbologies, if these are
enabled:
• Data Matrix •Aztec
•QR Code • PDF 417
DEFAULT
$CDESA00(CR)
Structured Append = Disable
$CDESA01(CR)
Structured Append = Enable
2D Normal/Inverse Symbol Control
Specifies the options available for decoding normal/negative printed 2D symbols. This
configuration item applies globally to all the 2D symbologies that support that feature
according to Standard AIM Specification: Data Matrix, QR, MicroQR, Aztec and Chinese
Sensible Code.
To set decoding of mirrored images, see "Mirror Reading Mode" on page 89. To
decode all
symbologies, including linear symbologies, refer to "
Decode Negative Image" on page 90
DEFAULT
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
.