Datalogic Gryphon I GFS4400 - Set AIM ID Individually for GS1-128

Data Format Enter/Exit Programming Mode
Product Reference Guide 55
Set AIM ID Individually for GS1-128
This feature configures a Label ID individually for the GS1-128 symbology and the
programming for this works the same way as Label ID. See Label ID: Set Individually Per
Symbology, starting on page 260 for detailed instructions on se
tting this feature.
$CU8AI00(CR)
Set AIM ID Individually for GS1-128 = Disable
$CU8AI01(CR)
Set AIM ID Individually for GS1-128 = Enable
DEFAULT