Digital Output References
Product Reference Guide
265
Digital Output
Output Activation:
Digital Output can set to be Activated/Deactivated when specified events occur.
Line State:
Selects whether the line is Active Low or Active High.
Activation Event:
Selects the event the line is activated on. Selectable events: Disabled, Good
Read, No Read, Right Code, Wrong Code. Right Code and Wrong Code are available only if
Code Verifier functionality is enabled.
Deactivation Event:
Selects the event the line is deactivated on. Selectable events: Disabled,
Timeout, Reading Phase On.
Deactivation Timeout:
Related to the previous parameter, sets the deactivation timeout for the
output.
To Next Page
Loading...
