Datalogic Gryphon I GFS4400 - Aiming Pointer; Presentation Illumination Control

Enter/Exit Programming Mode Reading Parameters
86 Gryphon™ I GFS4400
Presentation Illumination Control
Controls the illumination status while the reading mode is Automatic Trigger Object Sense
Operating Mode and the reader is attempting to detect objects.
DEFAULT
$CSMIL00(CR)
Illumination Control = OFF
$CSMIL01(CR)
Illumination Control = ON
$CSMIL02(CR)
Illumination Control = Dim
Aiming Pointer
Enables/disables the aiming pointer for all symbologies.
$CTAAP00(CR)
Aiming Pointer = Disable
$CTAAP01(CR)
Aiming Pointer = Enable
DEFAULT