Datalogic Gryphon I GFS4400 User Manual

Enter/Exit Programming Mode Reading Parameters
88 Gryphon™ I GFS4400
Mobile Phone Mode
This mode is useful for scanning bar codes displayed on a mobile phone. Other options for this
feature can be configured using the Datalogic Aladdin application.
$CSNPE00(CR)
Mobile Phone Mode = Disable
$CSNPE01(CR)
Mobile Phone Mode = Enable
DEFAULT
Mobile Bias
This variable mode alters scan module operation, optimizing barcode scanning for reading from
mobile device displays rather than standard labels. The range for this setting is from 0 to 255.
DEFAULT
$CSILF00\r
No Mobile Bias
$CSILF
Set Mobile Bias
To configure, scan the ENTER/EXIT PROGRAMMING MODE
bar code above, then the bar code at left followed by the
digits from the Alphanumeric characters in Appendix E,
Keypad representing your desired character(s). End by
scanning the ENTER/EXIT bar code.
Make a mistake? Scan the CANCEL bar code to
abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL

Datalogic Gryphon I GFS4400 Specifications

General

Brand	Datalogic
Model	Gryphon I GFS4400
Category	Barcode Reader
Language	English