140
7. Reset the printer by pressing and holding the CANCEL Key for approximately three
seconds.
8. After the resetting, verify operation by printing a Configuration Label.
The new font selection will be printed on the label under SYSTEM INFORMATION /
OPTIONAL LANGUAGES. (The new language also appears in the menu system under
SYSTEM SETTINGS / MENU LANGUAGE.) These are the only methods to determine
whether the download was successful.
An error has occurred if the menu system displays the new language selection, but all the
displayed messages remain in English. In this case, re-check your process or contact Datamax
Technical Support (be prepared to provide the Common.xls and DPL download files created).
Other possible error messages are as follows:
Menu Language Error Message Description
Please select the entire column(s) or the
desired language(s), by clicking on the
column letter(s)
After pressing the Generate DPL File(s) radio
button, the languages to convert were not
correctly selected.
Message text may not exceed MAX = xx
designated characters for this MID
The entered message exceeds the number of
characters specified in column C. You may not
modify this number.
9. Repeat Steps 1 – 8, above, using the filename misc.xls to translate printer option items. This
will output small20.ls.
To Next Page
Loading...
