Datamax H Class User Manual

141
Important Advanced File Handling Information --
• The standard printer leaves the factory with EFIGS loaded into Module Y. At this point,
Module Y is LOCKED and will only accept additional language downloads.
• After downloading a language update, Module Y is left UNLOCKED until the printer is
reset or power is cycled. In this state, Module Y will accept font, image and label format
downloads. The module will also honor the Clear Module request. Therefore, following
an update it is recommended that a reset be performed to lock the module; otherwise, a
software package may ‘Clear All Modules’ thus destroying the new menu language(s).
• Module Y can be UNLOCKED by sending this DPL string: <STX>KpY0
• To restore the factory generated EFIGS image, download the file *832296.01A to the
printer. This file is located on the Datamax FTP site. The letter at the end of the file
name (e.g., A) specifies the revision. The latest revision will be available on the FTP
site.
• Downloading the same language twice will automatically delete the first occurrence, but
will not free the memory space.
• Deletion of the selected language will reset the printer to English. The total number of
languages that the printer can now accept is limited to 10, but this number is dependent
upon the size of each language translation. The translation size will vary with the
number of messages that are translated for that particular language. Current complete
language files are about 7,000 bytes each; but with product growth, the total number of
languages is expected to drop to seven.

Datamax H Class Specifications

General

Print Method	Thermal Transfer/Direct Thermal
Interface	Ethernet, Wireless
Media Sensor	Reflective
Media Types	Labels, Tags
Resolution	203 dpi
Media Thickness	0.002 to 0.01 inches (0.05 to 0.25 mm)