50
PROCESS
FILE *
Selects from the list of external extensions and, as noted, converts then stores them
with internal file extensions.
External
Extension
Action Converted
(Internal)
Extension
BMP, PCX,
IMG, & F7B
Converts the file into an internal format, where
the result is stored in Module G.
DIM
BS Upgrades the printer boot-loader. N/A
DPL Parses file, and if label format then prints a
label.
N/A
LS Converts the file into an internal format, where
the result is stored in Module Y.
DLN
PLG Converts the file into an internal format, where
the result is stored as specified in the PLG file
(typically Module X).
PLU
SFL & SFP Converts file into an internal format. The last
three characters of the name should
correspond to the Font ID. (If the filename
does not contain a Font ID, you will be
prompted to enter it.) The resulting file is
stored in Module G.
DBM
TTF Converts the file into internal format. Last two
characters of the name should correspond to
the Font ID. (If the filename does not contain
a Font ID, you will be prompted to enter it.)
The resulting file is stored in Module G.
DTT
ZS Upgrades the printer firmware. N/A
FORMAT
MODULE *
Selects from a list of modules (D, F, G, H, X, and Y ) available for formatting.
To use an external memory device (SDIO or Thumbdrive), it must first be formatted
by the printer. During this formatting process, a folder (labeled F or H, respectively)
will be made in the module. All formats to be used by the printer must be placed
within this folder to be recognized.
Choosing FORMAT MODULE will erase existing data in the selected
module.
DELETE FILE
*
Selects from the list of available files for deleting. (Protected modules will not appear
in this list.)
COPY FILE * Selects from the list of available files for copying and then prompts you for the
destination module before execution.
To Next Page
Loading...
