Datasat LS10 - Page 106

LS10 Installation and Operating Guide Version 1.01
Appendix E. LS10 Remote Command API E-9 Document #: 9301H66300 Ver. 1.01
3. Generate Subwoofer with Neo:X
Generate a subwoofer (LFE) channel when using Neo:X with a 2-channel input source.
Command: @NEOXLFE [value]<cr>
Operation
Response: NEOXLFE [value]<CR>
Read/Write
Parameters
[value] Selection
0
Disable
1
Enable
4. Pro Logic II/IIx Mode
Selects Pro Logic II or Pro Logic IIx mode to Pro Logic, Music, Game, or Dolby Digital EX.
The Pro Logic II/IIx mode selection is in affect only when the Post Processing Mode
(DECODERPOST) is set for Pro Logic II or Pro Logic IIx.
Command: @DPL2MODE [value]<cr>
Operation
Response: DPL2MODE [value]<CR>
Read/Write
Parameters
[value] Selection
0
Pro Logic (1)
2
Music
3
Movie
5
Dolby Digital Ex
(2)
Notes:
(1) Pro Logic can only be selected with Pro Logic II (speaker configuration without LB/RB).
(2) Pro Logic EX can only be selected with Pro Logic IIx (speaker configuration with LB/RB).
Three additional controls are available only for use with Pro Logic IIx Music mode
(DPL2MODE 1). Those are Dimension, Center Width, and Panorama. See commands
DPL2DIM, DPL2CW, and DPL2PANO for additional details.