Datasat LS10 - Page 108

LS10 Installation and Operating Guide Version 1.01
Appendix E. LS10 Remote Command API E-11 Document #: 9301H66300 Ver. 1.01
Parameters:
cw Selection
0
0 (Off, no balance applied)
1
1
2
2
3
3 (Neutral)
4
4
5
5
6
6
7
7 Phantom Center
7. Panorama for Pro Logic IIx Music Mode
Enable or Disable the Panorama setting used with Pro Logic IIx music mode.
Command: @DPL2PANO [pano]<cr>
Response: DPL2PANO pano <CR>
Read/Write
Parameters:
pano Selection
0
0 Panorama off
1
1 Panorama on
8. Height Gain for Pro Logic IIz
This command sets or reads the height gain selection used with Pro Logic IIz.
Command: @DPL2HEGAIN [value]<cr>
Response: DPL2HEGAIN value<CR>
Read/Write
Parameters:
[value] Selection
0
Low
1
Mid
2
High