LS10 Installation and Operating Guide Version 1.01
Appendix E. LS10 Remote Command API E-12 Document #: 9301H66300 Ver. 1.01
9. Auro-3D Strength
This command sets upmixing strength for Auro-3D.
Command: @AUROSTRENGTH [value]<cr>
Response: AUROSTRENGTH value<CR> Read/Write
Parameters:
[value] Selection
1-16 16 is the highest strength level
10. Auro-3D Preset
This command sets or reads the Auro-3D Preset. Selections are Small, Medium, Large, or
Speech.
Command: @AUROPRESET [value]<cr>
Response: AUROPRESET value<CR> Read/Write
Parameters:
[value] Selection
0 Small
1 Medium
2 Large
3 Speech
11. Auro-3D Listening Mode
This command sets or reads the Auro-3D Listening Mode. Selections are Stereo, Surround,
and Auro-3D.
Command: @AUROLM [value]<cr>
Response: AUROLM value<CR> Read/Write
Parameters:
[value] Selection
0 Native
1 Stereo
2 Surround
3 Auro-3D (Valid only with one of
the Auro speaker Configurations
To Next Page
Loading...