Datasat LS10 - Page 110

LS10 Installation and Operating Guide Version 1.01
Appendix E. LS10 Remote Command API E-13 Document #: 9301H66300 Ver. 1.01
12. Dolby DRC Setting
Command: @TRUEHDDRC [drc]<cr>
Response: TRUEHDDRC drc<CR>
Read/Write
Parameters:
drc Selection
0
DRC Off
1
On / TrueHD-Auto
2
DRC On
LFE Boost
1. DTS LFE Boost
Enable 10dB gain to the subwoofer outputs when playing DTS audio
Command: @DECODERDTSLFEBOOST [dtslfe]<cr>
Response: DECODERDTSLFEBOOST [dtslfe]<CR>
Read/Write
Parameters:
dtslfe Selection
0
Do not apply 10dB gain for DTS
1
Apply 10dB gain for DTS
2. PCM LFE Boost
Enable 10dB gain to the subwoofer outputs when playing PCM audio
Command: @ DECODERPCMLFEBOOST [pcmlfe]<cr>
Response: DECODERPCMLFEBOOST pcmlfe<CR>
Read/Write
Parameters:
pcmlfe Selection
0
Do not apply 10dB gain for PCM
1
Apply 10dB gain for PCM