LS10 Installation and Operating Guide Version 1.01
Appendix E. LS10 Remote Command API E-14 Document #: 9301H66300 Ver. 1.01
3. Dolby LFE Boost
Enable 10dB gain to the subwoofer outputs when playing Dolby Digital decoded audio
Command: @ DECODERDDLFEBOOST [ddlfe]<cr>
Response: DECODERDDLFEBOOST ddlfe<CR>
Read/Write
Parameters:
ddlfe Selection
0
Do not apply 10dB gain for Dolby
Digital
1
Apply 10dB gain for Dolby Digital
Audio Decoder Stream Information
1. Decoder Stream
Returns a text description of the stream type currently playing
Command: @DECSTREAM<cr>
Response: [Desc]<CR>
Read/Write
Parameters:
[Desc]
Description of the current audio stream type being received by the decoder.
Example
Send: @DECSTREAM<cr>
Receive: DTS 48k + NeoX <cr>
2. Decoder Channels
Returns a text description of the number of channels at the decoder output. This does not
include additional channels from processing by Auro Decoder or Upmix, DTS NEO:X or
Dolby PLIIx/PLIIy.
Command: @DECCHANS<cr>
Response: [n.s]<CR>
Read/Write
The string [n.s] appears only when the decoder is running. In that case the values n and s
are defined as follows.
[n]
Number of main channels at the decoder output.
[s] The value is 1 when there is a decoder LFE output. Otherwise it is 0.
To Next Page
Loading...