Specification
32
3.11 SOUNDER
The module features an internal sounder to draw attention to warning, shutdown and electrical trip
alarms.
Sounder level 64db @ 1m
3.11.1 ADDING AN EXTERNAL SOUNDER TO THE APPLICATION
Should an external alarm or indicator be required, this can be achieved by using the DSE
Configuration Suite PC software to configure an auxiliary output for “Audible Alarm”, and by
configuring an auxiliary input for “Alarm Mute” (if required).
The audible alarm output activates and de-activates at the same time as the module’s internal
sounder. The Alarm mute input and internal alarm mute button activate ‘in parallel’ with each other.
Either signal will mute both the internal sounder and audible alarm output.
Example of configuration to achieve external sounder with external alarm mute button:
3.12 ACCUMULATED INSTRUMENTATION
Accumulated instrumentation along with Engine Hours and Number of Starts can be set/reset using
the DSE Configuration Suite PC software. Depending upon module configuration, this may have been
PIN number locked by your generator supplier.
To Next Page
Loading...
Need help?
General
