Dell EMC VxRail P470 - Page 39

Option Description
System Model
Name
Specifies the appliance model name.
System BIOS
Version
Specifies the BIOS version installed on the appliance.
System
Management
Engine Version
Specifies the current version of the Management Engine firmware.
System Service Tag Specifies the appliance Service Tag.
System
Manufacturer
Specifies the name of the appliance manufacturer.
System
Manufacturer
Contact
Information
Specifies the contact information of the appliance manufacturer.
System CPLD
Version
Specifies the current version of the appliance complex programmable logic device (CPLD) firmware.
UEFI Compliance
Version
Specifies the UEFI compliance level of the appliance firmware.
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as
memory testing and node interleaving.
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
1 Turn on, or restart your appliance.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the appliance to finish booting, and then
restart your appliance and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click Memory Settings.
Memory Settings details
The Memory Settings screen details are explained as follows:
Option
Description
System Memory
Size
Specifies the memory size in the appliance.
System Memory
Type
Specifies the type of memory installed in the appliance.
System Memory
Speed
Specifies the memory speed.
Pre-operating system management applications 39