Dell EMC VxRail P470 - Installing the Front Bezel; Appliance Cover; Removing the Appliance Cover

Installing the front bezel
Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1 Locate and remove the bezel key.
NOTE: The bezel key is attached to the back of the bezel.
2 Hook the right end of the bezel onto the chassis.
3 Fit the free end of the bezel onto the appliance.
4 Lock the bezel by using the key.
Figure 13. Installing the front bezel
1
front bezel 2 bezel lock
Appliance cover
The appliance cover protects the components inside the appliance and helps in maintaining air flow inside the appliance. Removing the
appliance cover activates the intrusion switch, which aids in maintaining appliance security.
Removing the appliance cover
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
52
Installing and removing components