Dell EMC VxRail P470 - Installing a 2.5-Inch Hard Drive Blank; Removing a Hot Swappable Hard Drive or Solid State Drive

Figure 22. Removing a 2.5-inch hard drive blank
1 hard drive blank 2 release button
Installing a 2.5-inch hard drive blank
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Figure 23. Installing a 2.5-inch hard drive blank
1
hard drive blank
Next steps
If removed, install the front bezel.
Removing a hot swappable hard drive or solid state drive
Prerequisites
1 Follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your appliance section.
Installing and removing components
65