Dell C2665dnf - Printing a Panel Settings Report; Changing the Language; When Using the Operator Panel; When Using the Tool Box

Printing a Panel Settings Report
The panel settings report shows current settings for the printer menus. For details about how to print a panel settings
report, see "Report / List."
Changing the Language
To change the language used on the touch panel:
When Using the Operator Panel
1 Press the (Information) button.
2 Tap t h e Tools tab, and then tap Language Settings .
3 Ta p Panel Language .
4 Tap until the desired language appears, and then tap the desired language.
5 Ta p OK .
When Using the Tool Box
1 Click Start → All Programs → Dell Printers → Dell C2665dnf Color Laser Multifunction Printer → Tool Box .
NOTE: For details about starting the Tool Box, see "Starting the Tool Box."
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Panel Language from the list at the left side of the page.
The
Panel Language page appears.
4 Select the desired language from Panel Language , and then click Apply New Settings .
Setting the Power Saver Timer Option
You can set the power saver timer for the printer. The printer enters the power saver mode when the printer is not
used for a certain period of time.
NOTE: If Panel Lock Control is set to Enable, you need to enter the four digit password to enter the Admin
Settings
menu.
To set the power saver timer:
1
Press the (Information) button.
2 Tap t h e Tools tab, and then tap Admin Settings .
3 Ta p System Settings .
4 Ta p General .
5 Ta p Power Saver Timer .
6 Ta p Sleep or Deep Sleep .
7 Tap – or +, or use the number pad to enter the desired value.
You can specify from 1 to 30 minutes for
Sleep or 1 to 30 minutes for Deep Sleep .
8 Ta p OK .
Operator Panel 115