Dell C2665dnf - Copy Defaults; Default Settings

Binary Used when no special processing is required for data.
Job Time-out
Purpose:
To specify the amount of time the printer waits for data to arrive from the computer. The print job is canceled if the time-out
time is exceeded.
Va lu e s:
Off Disables the job time-out.
On
*
30 seconds
*
Sets the time the printer waits for data to arrive from the computer.
Available Range: 5–300 seconds
Default Settings
Use Default Settings to modify the Copy, Scan, or Fax menu defaults.
Copy Defaults
Purpose:
To modify the Copy menu defaults.
Copy Defaults allows you to configure the following items in addition to the items under the Copy menu.
Auto Exposure Level
Purpose:
To specify the default background suppression level.
Va lu e s:
Normal
*
Sets the background suppression level to Normal.
High Sets the background suppression level to High.
Highest Sets the background suppression level to Highest.
Color Balance
Purpose:
To specify the default color balance level within the range of -3 to +3.
Va lu e s:
Yellow Low Density 0
*
Sets the color balance level of low density yellow.
Available Range: -3 to +3
Med. Density 0
*
Sets the color balance level of medium density yellow.
Available Range: -3 to +3
High Density 0
*
Sets the color balance level of high density yellow.
Available Range: -3 to +3
Understanding the Printer Menus
258