Dell C2665dnf - Setting a Login Name and a Password (SMB Only)

3 "Setting a Destination Using an Address Book"
4 "Sending the Scanned File on the Network"
Setting a Login Name and a Password (SMB Only)
The Scan to Network feature requires a user login account with a valid and non-empty password for authentication.
Confirm a login user name and password.
For Microsoft Windows:
If you do not use a password for your user login, you need to create a password on your User Login Account with the
following procedure.
For Windows XP:
1 Click start → Control Panel → User Accounts .
2 Click Change an account .
3 Click Create a password and add in a password for your user login account.
For Windows Vista and Windows 7:
1 Click Start → Control Panel .
2 Click User Accounts and Family Safety .
3 Click User Accounts .
4 Click Create a password for your account and add in a password for your user login account.
For Windows Server 2008:
1 Click Start → Control Panel .
2 Double-click User Accounts .
3 Click Create a password for your account and add in a password for your user login account.
For Windows Server 2008 R2:
1 Click Start → Control Panel .
2 Select User Accounts .
3 Click User Accounts .
4 Click Create a password for your account and add in a password for your user login account.
For Windows 8 and Windows Server 2012:
1 Point to the top or bottom right corner of the screen, and then click Settings .
Scanning 349