2-Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Va lu e s:
Off
*
Does not perform 2-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
Manual Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Color Saturation
Purpose:
To adjust the amount of colors to make the colors darker or lighter than the original.
Va lu e s:
High Increases the color saturation to brighten the color of the copy.
Normal
*
The color saturation is the same as the original.
Low Decreases the color saturation to lighten the color of the copy.
Margin
Purpose:
To specify the top, bottom, right, left, and middle margins of the copy.
Va lu e s:
Top/Bottom 0.2 inch
*
(4 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Left/Right 0.2 inch
*
(4 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Middle 0.0 inches
*
(0 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the copy.
Va lu e s:
Off Does not suppress the background.
On
*
Suppresses the background to enhance text.
Save Settings
Use the save settings to save a variety of copy features. And also use to create and edit custom tiles for copying.
Understanding the Printer Menus 273
To Next Page
Loading...
