Secure Settings
Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being
changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Panel Lock"
Panel Lock
Purpose:
To set a limited access to Admin Settings with a password, and to set or change the password.
Va lu e s:
Panel Lock Control Disable
*
Disables password protection for Admin Settings.
Enable Enables password protection for
Admin Settings.
Change Password
*1
0000–9999 Sets or changes the password required to access Admin Settings.
*1
This item is available only when Panel Lock Control is set to Enable.
Function Enabled
NOTE: Function Enabled feature is available only when Panel Lock Control is set to Enable.
Purpose:
To specify whether to enable or disable each of the printer functions, or to require a password to use the functions.
Va lu e s:
Copy On
*
Enables the Copy function.
On (Password) Enables the Copy function, but requires a password to
use the function.
On (Color
Password)
Enables the Copy function with a color mode, but
requires a password.
E-mail
Off
On
*
Disables the Copy function.
Enables the E-mail function.
On (Password) Enables the E-mail function, but requires a password.
Off Disables the E-mail function.
Fax On
*
Enables the Fax function.
On (Password) Enables the Fax function but requires a password to
send faxes (does not require a password to receive
incoming faxes).
Fax Driver
Off
Enable
*
Disables the Fax function (the printer will not send or
receive faxes).
Enables the Fax Driver function.
Disable Disables the Fax Driver function (the printer will not
send faxes).
Understanding the Printer Menus
254
To Next Page
Loading...
