Margin
Purpose:
To specify the top, bottom, right, left, and middle margins of the scanned image.
Va lu e s:
Top/Bottom 0.1 inch
*
(2 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Left/Right 0.1 inch
*
(2 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Middle 0.0 inches
*
(0 mm
*
) Sets the value in increments of 0.1 inch (1 mm).
Available Range: 0.0–2.0 inches (0–50 mm)
Create Folder
NOTE: Create Folder feature is available only for Scan to USB or Scan to Network.
Purpose:
To specify whether to create a folder when saving scanned images.
Va lu e s:
Off Does not create a folder when saving a scanned image.
On
*
Creates a folder when saving a scanned image.
File Naming Mode
Purpose:
To specify the detailed setting of File Naming Mode.
Va lu e s:
Auto
*
Sets the default file name.
Add Prefix Adds texts in front of the file name.
Prefix/Suffix String Specifies the texts that are added when Add Prefix
is selected.
Add Suffix Adds texts after the file name.
Prefix/Suffix String Specifies the texts that are added when Add Suffix
is selected.
Save Settings
Use the save settings to save a variety of scanner features when scanning to a Scan to E-mail, Scan to USB, Scan to
Network, or Scan to PC. And also use to create and edit custom tiles for scanning.
Understanding the Printer Menus 278
To Next Page
Loading...
