Dell C2665dnf - Tray Management

Adjust Altitude 0 meter
1000 meters
Sets the altitude of the location where the
printer is installed.
2000 meters
3000 meters
Apply New Settings After you change the settings, click this button
to apply the changes.
Restart printer to apply new settings Click this button to apply the changes.
Tray Management
Purpose:
To specify the paper types and sizes, and the tray priority for the MPF, tray1, and the optional 550-sheet feeder
respectively.
Va lu e s:
Tray Settings MPF Display Tray On Displays a popup message that prompts the user
Prompt
Off
to set Paper Type and Paper Size when the paper
is loaded in the MPF.
MPF Use Driver On Sets whether to use the printer driver settings
Settings for Print Job
Off
for the size and type of paper loaded in the MPF.
MPF Paper Size
*1
A4 (210x297mm) Sets the size of paper loaded in the MPF.
A5 (148x210mm)
B5 (182x257mm)
Letter (8.5x11")
Folio (8.5x13")
Legal (8.5x14")
Executive (7.3x10.5")
Envelope #10 (4.1x9.5")
Monarch Env. (3.9x7.5")
DL Env. (110x220mm)
C5 Env. (162x229mm)
Custom Size
MPF Custom Size -
Y
*1
Available Range:
127–355 mm (5.0–14.0 inches)
Sets the length of custom size paper loaded in
the MPF.
MPF Custom Size -
X
*1
Available Range:
77–215 mm (3.0–8.5 inches)
Sets the width of custom size paper loaded in
the MPF.
MPF Paper Type
*1
Plain Sets the type of paper loaded in the MPF.
Plain Thick
Covers(106–163g/m
2
)
Covers Thick(164–216g/m
2
)
Coated(106–163g/m
2
)
Coated Thick(164–216g/m
2
)
Label
Envelope
Understanding the Tool Box Menus
198