Dell C2665dnf - Changing the Clock Mode; Setting Sounds; Speaker Volume; Ringer Volume

11 Tap – or + or enter the date using the number pad, and then tap OK .
12 Ta p Time .
13 Enter the time using the number pad.
14 Ta p OK .
NOTE: The printer beeps and does not allow you to proceed to the next step if a wrong number is entered.
Changing the Clock Mode
You can set the current time using either the 12-hour or the 24-hour format.
1
Press the (Information) button.
2 Tap t h e Tools tab, and then tap Admin Settings .
3 Ta p System Settings .
4 Ta p General .
5 Ta p Date & Time .
6 Ta p Time .
7 Ta p 12 Hour or 24 Hour , and then tap OK .
Setting Sounds
Speaker Volume
1 Press the (Information) button.
2 Tap t h e Tools tab, and then tap Admin Settings .
3 Ta p Fax Settings .
4 Ta p Fax Line Settings .
5 Tap u n t il Line Monitor appears, and then tap Line Monitor .
6 Select the desired volume, and then tap OK .
7 Turn off the printer, and turn it on again to apply the settings.
Ringer Volume
1 Press the (Information) button.
2 Tap t h e Tools tab, and then tap Admin Settings .
3 Ta p Fax Settings .
4 Ta p Incoming Defaults .
5 Ta p Ring Tone Volume .
6 Select the desired volume, and then tap OK .
7 Turn off the printer, and turn it on again to apply the settings.
Specifying the Fax Settings Options
Changing the Fax Settings Options
1 Press the (Information) button.
2 Tap t h e Tools tab, and then tap Admin Settings .
Faxing 369