Restart printer to apply new settings Click this button to restart the printer and apply the changes.
Network Settings
NOTE: Network Settings is not available when the printer is connected using a USB cable.
Purpose:
To configure the setup of the printer using your web browser.
Va lu e s:
Print Server Settings
*1
Display Click to display the Print Server Setup page on the Dell Printer Configuration
Web Tool.
Display of Dell On Displays the server settings for the Dell Printer Configuration Web Tool.
Configuration Web Tool
Off Does not display the server settings for the Dell Printer Configuration Web Tool.
Apply New Settings After you change the settings, click this button to apply the changes.
Restart printer to apply new settings Click this button to restart the printer and apply the changes.
*1
This item is available only when Display of Dell Configuration Web Tool is set to On.
Copy Defaults
Purpose:
To create your own copy settings.
Va lu e s:
Output Color Full Color Prints in color mode.
Black & White Prints in black and white mode.
Select Tray MPF The paper is fed from the MPF.
Tray 1 The paper is fed from tray1.
Tray 2
*1
The paper is fed from the optional 550-sheet feeder.
Collation Auto Automatically sorts the copy job.
Collated Sorts the copy job.
Uncollated Does not sort the copy job.
Reduce / Enlarge 100% Does not enlarge or reduce the size of a copied image.
mm series
50% Sets the default reduction ratio.
A4->A5 (70%)
B5->A5 (81%)
A5->B5 (122%) Sets the default enlargement ratio.
A5->A4 (141%)
200%
Custom Sets the default enlargement / reduction ratio to a
custom ratio.
inch series 100% Does not enlarge or reduce the size of a copied image.
50% Sets the default reduction ratio.
Ledger->Letter (64 %)
Legal->Letter (78 %)
Understanding the Tool Box Menus 202
To Next Page
Loading...
