Font Pitch
Purpose:
To specify the font pitch for scalable mono spaced fonts.
Va lu e s:
10.00
*
Sets the value in increments of 0.01.
Available Range: 6.00–24.00
Font pitch refers to the number of fixed-space characters in a horizontal inch of type. For non-scalable mono spaced
fonts, the pitch is displayed, but cannot be changed.
NOTE: The Font Pitch menu is only displayed for fixed or mono spaced fonts.
See also:
"Pitch and Point Size"
Form Line
Purpose:
To set the number of lines in a page.
Va lu e s:
mm series
64 mm
*1
Sets the value in increments of 1 mm.
Available Range: 5–128 mm
*1
Denotes country-specific factory default values.
inch series
60 inches
*1
Sets the value in increments of 1 inch.
Available Range: 5–128 inches
*1
Denotes country-specific factory default values.
The printer sets the amount of space between each line (vertical line spacing) based on the Form Line and
Orientation menu items. Select the correct Form Line and Orientation before changing Form Line.
See also:
"Orientation"
Quantity
Purpose:
To set the default print quantity. (Set the number of copies required for a specific job from the printer driver. Values
selected from the printer driver always override values selected from the operator panel.)
Va lu e s:
1
*
Sets the value in increments of 1.
Available Range: 1–999
Understanding the Printer Menus 220
To Next Page
Loading...
