Dell C2665dnf - Page 225

Paper Select Mode
Purpose:
To specify the way to select the tray for PostScript Level3 Compatible mode. The change becomes effective after the
printer is turned off and then on again.
Va lu e s:
Auto
*
The tray is selected as the same setting as in the PCL mode.
Select From Tray The tray is selected in a method compatible with regular PostScript Level3 Compatible printers.
Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job which does not specify a print
mode.
Va lu e s:
Color
*
Prints in the color mode.
Black Prints in the black and white mode.
PDF
Use the PDF menu to change printer settings that only affect the PDF jobs.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Quantity
Purpose:
To specify the number of copies to print.
Va lu e s:
1
*
Sets the value in increments of 1.
Available Range: 1–999
2 Sided Print
Purpose:
To specify whether to print on both sides of a sheet of paper.
Va lu e s:
1 Sided
*
Does not print on both sides of a sheet of paper.
2 Sided Flip on Long Edge* Prints on both sides of a sheet of paper to be bound by long edge.
Flip on Short Edge Prints on both sides of a sheet of paper to be bound by short edge.
Understanding the Printer Menus
223