Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a
connection is made.
Va lu e s:
Off Turns off the volume of the line monitor.
Low Sets the volume of the line monitor to Low.
Medium
*
Sets the volume of the line monitor to Medium.
High Sets the volume of the line monitor to High.
DRPD Pattern
Purpose:
To provide a separate number for faxing with a distinctive ring pattern.
Va lu e s:
Pattern1–7 DRPD is a service provided by some telephone companies. DRPD Patterns are specified by your
telephone company. The patterns provided with your printer are shown below:
Pattern 1
Pattern 2
Pattern 3
Pattern 4
*
Pattern 5
Pattern 6
Pattern 7
Ask your telephone company which pattern you need to select to use this service. For example, Pattern
7 is the New Zealand FaxAbility distinctive ringing pattern: rings for 400 ms, stops for 800 ms, rings
for 400 ms and stops for 1400 ms. This pattern is repeated over and over again. This printer only
responds to Distinctive Alert cadence(s) DA4 in New Zealand.
Understanding the Printer Menus
233
To Next Page
Loading...
