Dell C2665dnf - Page 243

Display Brightness
Purpose:
To adjust the screen brightness of the touch panel.
Va lu e s:
5
*
Sets the brightness in ten levels, with ten being the brightest.
Available Range: 1-10
Audio Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Va lu e s:
Control Panel Off
*
Does not emit a tone when the operator panel input is correct.
Soft Emits a tone when the operator panel input is correct.
Normal
Loud
Invalid Key Off
*
Does not emit a tone when the operator panel input is incorrect.
Soft Emits a tone when the operator panel input is incorrect.
Normal
Loud
Machine Ready Off Does not emit a tone when the printer is ready to process a job.
Soft Emits a tone when the printer is ready to process a job.
Normal
*
Loud
Copy Completed Off Does not emit a tone when a copy job is complete.
Soft Emits a tone when a copy job is complete.
Normal
*
Loud
Job Completed Off Does not emit a tone when a job other than a copy job is complete.
Soft Emits a tone when a job other than a copy job is complete.
Normal
*
Loud
Fault Tone Off Does not emit a tone when a job ends abnormally.
Soft Emits a tone when a job ends abnormally.
Normal
*
Loud
Alert Tone Off Does not emit a tone when a problem occurs.
Soft Emits a tone when a problem occurs.
Normal
*
Loud
Understanding the Printer Menus
241