1158 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
private-vlan mapping secondary-vlan
c s
Map secondary VLANs to the selected primary VLAN.
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the no private-vlan mapping
secondary-vlan vlan-list command syntax.
Parameters
Defaults
none
Command Modes
INTERFACE VLAN
Command
History
Usage
Information
The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
show interfaces private-vlan
c s
Display type and status of PVLAN interfaces.
Syntax
show interfaces private-vlan [interface interface]
Parameters
Defaults
none
show vlan private-vlan mapping Display primary-secondary VLAN mapping.
switchport mode private-vlan Set the PVLAN mode of the selected port.
vlan-list
Enter the list of secondary VLANs to associate with the selected primary VLAN, as described
above. The list can be
in comma-delimited or hyphenated-range format, following the
convention for range input.
Version 7.8.1.0 Introduced on C-Series and S-Series
private-vlan mode Set the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan Display type and status of PVLAN interfaces.
show vlan private-vlan Display PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan
mapping
Display primary-secondary VLAN mapping.
switchport mode private-vlan Set the PVLAN mode of the selected port.
interface interface (OPTIONAL) Enter the keyword interface, followed by the ID of the specific
interface for which to display PVLAN status.
To Next Page
Loading...
