Dell Force10 TeraScale E Series - Page 1262

1262 | Remote Monitoring (RMON)
www.dell.com | support.dell.com
Example 2
Figure 49-9. show rmon history brief Command Example
show rmon log
c e s
Display the contents of RMON Log Table.
Syntax
show rmon log [index] [brief]
Parameters
Defaults
No default behavior
Command Modes
EXEC
Command
History
Example 1
Figure 49-10. show rmon log index Command Example
Example 2
Figure 49-11. show rmon log brief Command Example
Usage
Information
The log table has a maximum of 500 entries. If the log exceeds that maximum, the oldest log entry is
purged to allow room for the new entry.
FTOS#show rmon history brief
index ifIndex interface
--------------------------------------------------------------------
-
6001 100974631 GigabitEthernet 2/0
6002 100974631 GigabitEthernet 2/0
6003 101236775 GigabitEthernet 2/1
6004 101236775 GigabitEthernet 2/1
9001 134529054 GigabitEthernet 3/0
9002 134529054 GigabitEthernet 3/0
9003 134791198 GigabitEthernet 3/1
9004 134791198 GigabitEthernet 3/1
FTOS#
index
(OPTIONAL) Enter the log index number to display just that entry.
brief (OPTIONAL) Enter the keyword brief to display the RMON Log Table in
an easy-to-read format.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series
FTOS#show rmon log 2
RMON log entry, alarm table index 2, log index 1
log time: 14638 (THU AUG 12 22:10:40 2004)
description: 2
FTOS#
FTOS#show rmon log br
eventIndex description
--------------------------------------------------------------------
-
2 2
4 4
FTOS#