EasyManua.ls Logo

Dell Force10 TeraScale E Series - Page 1393

Dell Force10 TeraScale E Series
1640 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SONET | 1393
Related
Commands
ppp next-hop
e
Assign an IP address as the next hop for this interface.
Syntax
ppp next-hop ip-address
To delete a next hop address, enter no ppp next-hop.
Parameters
Defaults
Not configured.
Command Modes
INTERFACE
Usage
Information
This IP address must match the peer’s IP address or the link is not established. A peer will configure
this IP address.
ppp pap hostname
e
Configure a host name for PAP authentication.
Syntax
ppp pap hostname name
To delete a host name, enter no ppp pap hostname.
Parameters
Defaults
Not configured.
Command Modes
INTERFACE
Usage
Information
For peers to successfully negotiate authentication, you must configure a hostname, password, remote
hostname and remote password for PAP authentication.
Related
Commands
ppp authentication Enable CHAP or PAP or both authentication.
ppp chap rem-hostname Configure a remote host name for CHAP authentication.
ppp chap hostname Configure a hostname for CHAP authentication.
ppp chap password Configure a password for CHAP authentication.
ip-address
Enter an IP address in dotted decimal format (A.B.C.D).
name
Enter a character string up to 32 characters long.
ppp authentication Enable CHAP or PAP or both authentication.
ppp pap password Configure a password for PAP authentication.
ppp pap rem-hostname Configure a remote hostname for PAP authentication.
ppp pap rem-password Configure a remote password for PAP authentication.

Table of Contents

Related product manuals