Dell Force10 TeraScale E Series - Page 1392

1392 | SONET
www.dell.com | support.dell.com
Usage
Information
For peers to successfully negotiate authentication on both sides of the link, you must configure a
hostname, password, remote hostname and remote password for CHAP authentication.
Related
Commands
ppp chap rem-hostname
e
Configure a remote hostname to be used in the CHAP authentication process.
Syntax
ppp chap rem-hostname name
To remove the remote hostname, enter no ppp chap rem-hostname.
Parameters
Defaults
Not configured.
Command Modes
INTERFACE
Usage
Information
For peers to successfully negotiate authentication on both sides of the link, you must configure a
hostname, password, remote hostname and remote password for CHAP authentication.
Related
Commands
ppp chap rem-password
e
Configure a remote password for CHAP authentication.
Syntax
ppp chap rem-password password
To remove a password, enter no ppp chap rem-password.
Parameters
Defaults
Not configure.
Command Modes
INTERFACE
Usage
Information
For peers to successfully negotiate authentication, you must configure a hostname, password, remote
hostname and remote password for CHAP authentication.
ppp authentication Enable CHAP or PAP or both authentication.
ppp chap hostname Configure a hostname for CHAP authentication.
ppp chap rem-hostname Configure a remote hostname for CHAP authentication.
ppp chap rem-password Configure a remote password for CHAP authentication.
name
Enter a character string up to 32 characters long.
ppp authentication Enable CHAP or PAP or both authentication.
ppp chap rem-password Configure a remote password for CHAP authentication.
ppp chap hostname Configure a hostname for CHAP authentication.
ppp chap password Configure a password for CHAP authentication.
password
Enter a character string up to 32 characters long.