1552 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Important Points to Remember
• A sending task enqueues messages into the SWP queue3 for a receiving task and waits for an
acknowledgement.
• If no response is received within a period of time, the SWP time-out mechanism re-submits the
message at the head of the FIFO queue.
• After retrying several times, the following time-out message is generated:
SWP-2-NOMORETIMEOUT
• In the display output in Figure 65-13, a retry (Retries) value of zero indicates that the SWP
mechanism reached the maximum number of retransmissions without an acknowledgement.
show revision
e
Display revision numbers of all line card, RPM, and SFM components.
Syntax
show revision
Defaults
No default behavior or value
Command Modes
EXEC Privilege
Command
History
Version 7.5.1.0 Introduced
To Next Page
Loading...
