E-Series Debugging and Diagnostics | 1567
show hardware fpc lookup detail
e
Display diagnostic and debug information related to the lookup functional area of the Flexible Packet
Classification (FPC).
Syntax
show hardware linecard number port-set pipe-number fpc lookup detail
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
linecard number Enter the keyword linecard followed by the line card slot number.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300
port-set pipe-number Enter the keyword port-set followed by the number of the line card’s
Port-Pipe.
Range: 0 to 1
Version 6.5.4.0 Introduced
To Next Page
Loading...
