Dell Force10 TeraScale E Series - Page 1568

1568 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Example
Figure 65-22. show hardware linecard Command Example
Related
Commands
show hardware rpm cp
e
Display advanced debugging information for the RPM processors.
Syntax
show hardware rpm slot-number cp {data-plane | management-port} | party-bus}
{counters | statistics}
Parameters
FTOS#show hardware linecard 0 port-set 0 fpc lookup detailed
Summary of Error Registers
------- -- ----- ---------
0 Counters Enabled :
Cyclone 1.5 ChassisMap : 0x00000000
Cyclone 1.5 MixedMode : 0x00000000
T2L party Status : No Errors
partyType ErrorCount
---------- ----------
Summary of Last 16 CamSearches
=========================================================
I CamKey P T R P E N
n a a P o g W
d r b I r r r
e i l D t e I
x t e I s n
y T d s d
y e
p x
21554 50697065.5f302045.72726f72.2026204d.61736b20 0x52656769
0x73746572 0x2044756d 1879719229 1027423549 1027423549
Summary of Last 16 CamHits
==========================================
I Hit0/ Hit1/ S R P E N
n Index0 Index1 r P o g W
d c I r r r
e H D t e I
x C I s n
o d s d
d e
e x
0 0/0x00000 0/0x00000 0x00 0x00 00 0 00
1 0/0x00000 0/0x00000 0x00 0x00 00 0 00
2 0/0x00000 0/0x00000 0x00 0x00 00 0 00
3 0/0x00000 0/0x00000 0x00 0x00 00 0 00
4 0/0x00000 0/0x00000 0x00 0x00 00 0 00
5 0/0x00000 0/0x00000 0x00 0x00 00 0 00
6 0/0x00000 0/0x00000 0x00 0x00 00 0 00
7 0/0x00000 0/0x00000 0x00 0x00 00 0 00
8 0/0x00000 0/0x00000 0x00 0x00 00 0 00
9 0/0x00000 0/0x00000 0x00 0x00 00 0 00
10 0/0x00000 0/0x00000 0x00 0x00 00 0 00
11 0/0x00000 0/0x00000 0x00 0x00 00 0 00
12 0/0x00000 0/0x00000 0x00 0x00 00 0 00
13 0/0x00000 0/0x00000 0x00 0x00 00 0 00
FTOS#
show hardware fpc forward Display information related to FPC forward.
slot-number
Enter the RPM slot number 0 or 1.
data-plane (OPTIONAL) Enter the keywords data-plane to display information
about the dataplane interface on the control processor of the specified RPM.