E-Series Debugging and Diagnostics | 1569
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 65-23. show hardware rpm Command Examples
management-port (OPTIONAL) Enter the keywords management-port to display
information about the management-port interface of the control processor on
the specified RPM.
party-bus (OPTIONAL) Enter the keywords party-bus to display control processor
information on the party-bus of the specified RPM.
counters (OPTIONAL) Enter the keyword counters to display the standard
Ethernet counters.
statistics (OPTIONAL) Enter the keyword statistics to display driver-related
counters
Version 6.5.4.0 Introduced
FTOS#show hardware rpm 0 cp data-plane counters
Input statistics
31262 Bytes, 319 Frames,
31262 Total Bytes, 319 Total Frames,
0 Broadcasts, 0 Multicasts,
0 CRC, 0 Oversize,
0 Fragments, 0 Jabber,
0 64-byte Frames, 638 127-byte Frames,
0 255-byte Frames, 0 511-byte Frames,
0 1023-byte Frames, 0 Max Frames,
0 Error, 0 Dropped,
0 Undersized
Output statistics
31262 Bytes, 319 Frames, 357822480 Total Bytes,
0 Collisions, 0 Late collisions,
0 Broadcasts, 0 Multicasts
FTOS#show hardware rpm 0 cp data-plane statistics
Input statistics
640 Interrupts, 0 Ticks,
0 DMA Errors, 0 Stopped,
0 Cleanup, 0 Throttle Drops,
0 Status Error, 0 Too Large,
0 Buff Err0, 320 Receive Interrupts,
320 Readied for Protocols, 0 Jumbo,
0 Jumbo Error, 0 Ignored,
0 Jumbo Missing first, 0 Jumbo Dup First,
0 Jumbo Mget Failed,
0 Jumbo ClGet Failed, 0 No Mem,
0 Overflow fix count,
0 Mget Failed, 0 ClGet Failed
Output statistics
0 Pause, 0 Watchdog,
0 Late Collision, 0 Underrun,
0 Retransmit Limit, 0 Out Frames,
0 No Mem, 0 Phy Syncs
FTOS#
To Next Page
Loading...
