802.1X | 199
dot1x supplicant-timeout
c e s
Configure the amount of time after which exchanges with the supplicant time out.
Syntax
dot1x supplicant-timeout seconds
To return to the default, use the no dot1x supplicant-timeout command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
dot1x tx-period
c e s
Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE.
Syntax
dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
Parameters
Defaults
30 seconds
Command Modes
INTERFACE
Command
History
seconds
Enter a time-out value in seconds.
Range: 1 to 300, where 300 is implementation dependant.
Default: 30
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
seconds
Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
Range: 1 to 31536000 (1 year)
Default: 30
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
To Next Page
Loading...
