Dell Force10 TeraScale E Series - Page 267

Access Control Lists (ACL) | 267
show config
c e s
Display the current PREFIX-LIST configurations.
Syntax
show config
Command Modes
PREFIX-LIST
Command
History
Example
Figure 9-9. Command Example: show config
show ip prefix-list detail
c e s
Display details of the configured prefix lists.
Syntax
show ip prefix-list detail [prefix-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
FTOS(conf-nprefixl)#show config
!
ip prefix-list snickers
FTOS(conf-nprefixl)#
prefix-name
(OPTIONAL) Enter a text string as the name of the prefix list, up to 140 characters.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series