Dell Force10 TeraScale E Series - Page 268

268 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Example
Figure 9-10. Command Example: show ip prefix-list detail
show ip prefix-list summary
c e s
Display a summary of the configured prefix lists.
Syntax
show ip prefix-list summary [prefix-name]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 9-11. Command Example: show ip prefix-list summary
FTOS#show ip prefix-list detail
Prefix-list with the last deletion/insertion: filter_ospf
ip prefix-list filter_in:
count: 3, range entries: 3, sequences: 5 - 10
seq 5 deny 1.102.0.0/16 le 32 (hit count: 0)
seq 6 deny 2.1.0.0/16 ge 23 (hit count: 0)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 0)
ip prefix-list filter_ospf:
count: 4, range entries: 1, sequences: 5 - 10
seq 5 deny 100.100.1.0/24 (hit count: 5)
seq 6 deny 200.200.1.0/24 (hit count: 1)
seq 7 deny 200.200.2.0/24 (hit count: 1)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 132)
FTOS#
prefix-name
(OPTIONAL) Enter a text string as the name of the prefix list, up to 140 characters long.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to
16 characters long.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
FTOS#show ip prefix summary
Prefix-list with the last deletion/insertion: test
ip prefix-list test:
count: 3, range entries: 1, sequences: 5 - 15
ip prefix-list test1:
count: 2, range entries: 2, sequences: 5 - 10
ip prefix-list test2:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test3:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test4:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test5:
count: 1, range entries: 1, sequences: 5 - 5
ip prefix-list test6:
count: 1, range entries: 1, sequences: 5 - 5
FTOS#